Auto Parts Stamping High Speed Feeder Material Thickness 0.6-6.0mm

1. The action mode of the automatic feeder is circular motion of the roller, instead of the linear motion of the four guide columns, the automatic feeder will not have a seizure phenomenon;
2. The automatic feeding machine with high degree of automation has: a moving head type feeder controlled by a computer, a laser feeding material feeder, a high pressure air pressure and a computer feeding material feeder;
3. automatic feeder has three series (unwinding leveling feeder), two series (unwinding leveling machine), feeder series (NC servo feeder, high speed roller feeder, horizontal electronic feeder, yaw Stamping equipment such as feeders, precision leveling machines, automatic material racks, and AC servo robots;
4. Specifications and features: the strength of the roller feeder;
5. production: can be processed continuously.

The pneumatic feeder is the most affordable feeder in the stamping industry, as it automates stamping production with minimal customer investment.

1. Install the three-point combination before the air inlet of the pneumatic feeder, and add a proper amount of lubricating oil to the three-point combination oiler, then connect the air source and adjust the screw on the three-point combination filter to adjust the intake air. The pressure is such that the air pressure of the pneumatic feeder is maintained at 4.5 kg/cm2 to 5 kg/cm2.

2. Open the air valve of the pneumatic feeder and let the airflow enter the pneumatic feeder. At this time, check whether there are air leakage in each part of the pneumatic feeder. If there is any air leakage, re-apply the waterproof tape and tighten until there is no leakage. So far.

Specification:
 

Straigtening performance:
 

 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi